Polaris Pool Cleaner Parts for Sale

With Polaris pool cleaners, parts, and accessories, the tedious tasks of pool maintenance are taken care of so that only enjoyable moments remain. They have state-of-the-art technologies to make sure everything runs smoothly and efficiently, while also providing an app-enabled control system with iAquaLink for added convenience! 

We offer three models of Polaris pool cleaner parts in-store and online: robotic, pressure-side, and suction-side.  

Robotic pool cleaners operate easily because they do not rely on your pump’s suction or pressure for movement around your pool and they are energy efficient because they are electric. If your robotic pool cleaner is not moving, the power cord may have a short, where the wires have broken, inside the rubber casing. If the cord is intact, you will want to check the drive motor itself, to make sure connections are tight and that the power is reaching the motor. If it is, and the motor is not responding to the power, this may be signaling the need for a new Polaris pool cleaner drive motor part.

If your robotic pool cleaner is slow, this is usually a problem of loose drive tracks, loose drive belts or missing small Polaris robotic pool cleaner parts that keep tension on the belts and tracks. If your robotic pool cleaner is moving but not climbing the walls anymore, this could be an indication of worn drive tracks or wheel tube brushes. 

Slow operation may be caused by a full debris bag or filter, or the drive tracks or wheels have become worn, rounded, loose, or are out of alignment. Check all the belts and pulleys for proper position and tension, and the Polaris pool cleaner wheels and other parts for correct alignment and movement.

Robotic pool vacuum cleaners are available for both in-ground and above-ground pools, so make sure that you have the right type of cleaner for your specific type of pool and the corresponding Polaris cleaner parts that suit your above-ground pool best.

Another type of Polaris’ pool cleaners are the pressure-side models. Pressure pool cleaners thrive capturing larger items such as leaves, acorns and pebbles before they reach the filter.

If your pressure pool cleaner is slow, worn tires will reduce speed and wall climbing ability. Missing wheel bearings or damaged Polaris pool cleaner parts need repair to fix issues with slow movement. Be sure your booster pump is not leaking or making strange noises, inspect the hose for leaks, and check for your drive belts slipping, a broken axle, or worn rounded tires.

If your pressure cleaner does not move, it is likely because of one of the following causes. You may need a Polaris pool cleaner replacement part if the booster pump has an airlock or failed shaft seal, drive belts or wheel axles are broken or loose, your WMS (Water Management System) has disconnected or broken hoses, your feed hose or sweeper tail has splits or holes, or the backup valve is malfunctioning, 

An example of one of our pressure-side pool cleaners is the Polaris Vac-Sweep cleaner. It does not require a separate pump, connecting directly to your existing pump for efficient operation. This Polaris automatic pool cleaner and its parts contain a large filter bag that collects dirt as it works with three powerful jets to remove grime that has stuck to the walls and floor of your pool. 

Available to ship across Canada, the third Polaris pool cleaner model and parts is suction-based. A suction pool cleaner is an automatic pool cleaner that conveniently cleans your swimming pool with Polaris cleaner parts. This model utilizes your pool pump’s power to help remove dirt and debris at the bottom of your pool. This type of cleaner requires minimal interaction, working seamlessly with the pool filtration system. 

To address a suction pool cleaner that is not moving, make sure the cleaner’s hose is firmly attached to the suction line in the skimmer or to the dedicated cleaner line. Also check your Polaris pool cleaner’s hose parts for any air leaks, either where the hose sections join together, or from splits or holes in the hose. 

If your suction pool cleaner is slow or sticking to the pool floor, check for holes in the cleaner hose, a worn footpad, a worn seal, and that the suction valves are open. Additionally, if your suction cleaner does not cover the entire pool, consider adding extra lengths of hose.

Browse our Polaris pool cleaner parts page to buy any of the parts mentioned above! Get a discount on Polaris pool cleaner parts and all other pool supplies based on your rewards level. The more you shop, the more you save! We offer curbside pickup and Canada-wide shipping. If you are in need of pool cleaner parts near you, Polaris equipment has transformed the way you maintain and operate your pool experience. We calculate shipping rates on our website immediately, and for those who’d like, insured shipping is available as well. You can safely shop Polaris’ pool cleaner parts for sale at Toronto Pool Supplies. Contact us today!