Pool Filter Parts: Cartridge Parts, Sand Filter Parts & More
The parts of a pool filter system are important in keeping your water clean and healthy. One of the ways this is achieved is through having balanced water chemistry. Swimming pool filter parts are responsible for evenly distributing pool chemicals and removing the harmful small particles. The skimmer will gradually cycle in and throughout the water subsequently, taking the captured debris and trapping it in the filter basket.
One of the best filter parts is the pool pump. This is the main mechanism that moves water around the pool and carries it to the filter and heater. Without a pool pump, the poor state of your water circulation, or lack thereof altogether, can become problematic on your other filter parts and the pool water as a whole. Issues such as debris and other minerals can begin to build up or the water chemistry can be significantly affected. In regards to either issue, the pool owner will need to repair parts for the pool filter.
When considering a spa or pool filter, the parts vary spending on the unit. There are three types of pool filters: sand, cartridge, and diatomaceous earth (DE). Sand pool filters and parts come at a lower cost, have easier maintenance, and sand lasts 5 to 7 years before needing a change. In a swimming pool, sand is the part in the filter that prevents larger contaminants from being able to pass through. A sand filter uses a multiport valve part in the pool as designed to settle the sand back down to repeat the filtration process. The secondary, tertiary and additional parts on sale for your sand filtered pool include the pressure gauge, clamp, and lateral assembly.
Cartridge filter contaminants are as small as 10 microns, meaning they can remove the very smallest of debris and particles. The cartridge tank parts in the pool filter perform no backwashing, thus, result in less water waste.
DE filter contaminants are as small as 5 microns. D.E’s power can be added through the pool skimmer, no caustic chemicals are required for cleaning. This helps prevent emptying your wallet for costly replacement parts for your pool filter.
In the event that you do need a replacement part for your swimming pool filter, here are a couple warning signs to be aware of cause for concern. If you hear or see water dripping around your filter, the o-ring could be deteriorating or the tank itself may have sprung a leak. This may be from natural causes especially due to harsh winter weather conditions taking its toll on pool filter parts in Canada. Notice your filter running in short cycles, this may be a flow rate problem. It could also be from the pool pump part being too strong or as a result of algae or other debris clogging. If there’s some filter material in the pool after backwashing, check the bolts holding the parts in place. The standpipe or filter lateral part for your spa or pool may be defective. A tear in the fabric of the grid manifold or a spotted crack warrants repair. Check the pressure gauge as part of your regular pool maintenance. If the pressure is too low, this could cause a blockage before the filter. If the pressure is too high, blockage after the filter. All in all, provide close attention to your pool filter plumbing parts.
Even if it is not a situation where a part has broken, browsing online for pool filter parts is always a good idea. Check out the newest innovations and latest gadgets that will improve your water filtration system. If it is a pool filter part near you or a discounted pool filter part, why not take the plunge and invest in an upgrade!